--- title: Comparing Aluminum Welding With Push-Pull Gun and a Push Gun description: Stuck trying to figure out whether to use a push gun or push-pull gun with your aluminum welding job? Find out which works best in our new guide here: image: https://blog.daihen-usa.com/hubfs/All_Blog_Content/OTC_blog_790x350_Pushpull.png --- [![OTC Daihen Inc.](https://www.daihen-usa.com/wp-content/uploads/2022/05/logo.png)](https://www.daihen-usa.com/) [OTC DAIHEN](https://www.daihen-usa.com) ## Primary Menu - Technologies - [![Synchro-Feed-Evolution-menu](https://www.daihen-usa.com/wp-content/uploads/2024/01/Synchro-Feed-Evolution-menu.webp)Synchro Feed Evolution Ultra Low Spatter Welding](https://www.daihen-usa.com/low-spatter-synchro-feed-evolution/) - [![ultra-low-spatter-menu](https://www.daihen-usa.com/wp-content/uploads/2024/01/ultra-low-spatter-menu.png)Plasma Jet TIG High Jet Stream Flow](https://www.daihen-usa.com/plasma-jet-tig-welder/) - [Support](https://www.daihen-usa.com/support/) - [![emergency](https://www.daihen-usa.com/wp-content/uploads/2022/07/emergency.png)Emergency Support](https://www.daihen-usa.com/support/#emergency) - [![support](https://www.daihen-usa.com/wp-content/uploads/2022/07/support.png)Service](https://www.daihen-usa.com/support/#spareparts) - [![rma](https://www.daihen-usa.com/wp-content/uploads/2022/07/rma.png)In-House Repair](https://www.daihen-usa.com/support/#techsupport) - [![parts](https://www.daihen-usa.com/wp-content/uploads/2022/07/parts.png)Parts](https://www.daihen-usa.com/support/#inhouserepair) - [Training](https://www.daihen-usa.com/training/) - [![register-menuicon](https://www.daihen-usa.com/wp-content/uploads/2022/07/register-menuicon.png)Register](https://www.daihen-usa.com/training/#register) - [![class-menuicon](https://www.daihen-usa.com/wp-content/uploads/2022/07/class-menuicon.png)Class Offering](https://www.daihen-usa.com/training/#courseoverview) - [![faq-menuicon](https://www.daihen-usa.com/wp-content/uploads/2022/07/faq-menuicon.png)Training FAQs](https://www.daihen-usa.com/training/#trainingfaqs) - [Resources](https://www.daihen-usa.com/resources/) - [![manuals](https://www.daihen-usa.com/wp-content/uploads/2022/07/manuals.png)Product Manuals](https://www.daihen-usa.com/product-manuals-otc-daihen/) - [![buyers-guide](https://www.daihen-usa.com/wp-content/uploads/2022/07/buyers-guide.png)Buyer’s Guides & Videos](https://www.daihen-usa.com/buyers-guides-videos/) - [![industry-articles](https://www.daihen-usa.com/wp-content/uploads/2022/07/industry-articles.png)Industry Articles](https://blog.daihen-usa.com/?__hstc=51647990.76b0b6a765e9ea5764d9133abef56596.1646249670674.1652379522534.1659373989410.28&__hssc=51647990.1.1659373989410&__hsfp=2776171110) - [![weld-spatter](https://www.daihen-usa.com/wp-content/uploads/2022/07/weld-spatter.png)Weld Spatter 101](https://www.daihen-usa.com/weld-spatter/) - [![warranty](https://www.daihen-usa.com/wp-content/uploads/2022/07/warranty.png)Warranty Info](https://www.daihen-usa.com/resources/warranty-info/) - [![older-model-charts](https://www.daihen-usa.com/wp-content/uploads/2022/07/older-model-charts.png)Reference Charts](https://www.daihen-usa.com/reference-charts/) - [![cost](https://www.daihen-usa.com/wp-content/uploads/2022/07/cost.png)Welding Cost Analysis](https://info.daihen-usa.com/welding-cost-analysis?__hstc=51647990.76b0b6a765e9ea5764d9133abef56596.1646249670674.1652379522534.1659373989410.28&__hssc=51647990.1.1659373989410&__hsfp=2776171110) - [![newsletter](https://www.daihen-usa.com/wp-content/uploads/2022/07/newsletter.png)Get My Free Newsletter](https://info.daihen-usa.com/welding-automation-newsletter?__hstc=51647990.76b0b6a765e9ea5764d9133abef56596.1646249670674.1652379522534.1659373989410.28&__hssc=51647990.1.1659373989410&__hsfp=2776171110) - [Blog](https://blog.daihen-usa.com/) - [About OTC DAIHEN](https://www.daihen-usa.com/about-otc-daihen/) - [![about](https://www.daihen-usa.com/wp-content/uploads/2022/07/about.png)About Us](https://www.daihen-usa.com/about-otc-daihen/) - [![team](https://www.daihen-usa.com/wp-content/uploads/2022/07/team.png)Meet The Team](https://www.daihen-usa.com/meet-the-team/) - [![faq](https://www.daihen-usa.com/wp-content/uploads/2022/07/faq.png)FAQs](https://www.daihen-usa.com/faqs/) - - Search Search - [Contact Us](https://www.daihen-usa.com/contact/) - [Solutions ▼](https://www.daihen-usa.com/support/) - [Robotic Welding Cells](https://www.daihen-usa.com/robotic-welding-cells/) - [Welding Robots](https://www.daihen-usa.com/arc-welding-robots/) - [Welding Power Sources](https://www.daihen-usa.com/welding-power-sources/) - [COMPANY](https://www.daihen-usa.com/about-otc-daihen/) - [TRAINING](https://www.daihen-usa.com/training/) - [SUPPORT](https://www.daihen-usa.com/support/) - [![LinkedIn logo](https://blog.daihen-usa.com/hs-fs/hubfs/otc-linkedin.png?width=18&height=18&name=otc-linkedin.png)](https://www.linkedin.com/company/otc-daihen-inc.) - [![Youtube logo](https://blog.daihen-usa.com/hs-fs/hubfs/otc-youtube.png?width=26&height=26&name=otc-youtube.png)](https://www.youtube.com/user/OTCDaihen) [![OTC DAIHEN Logo](https://blog.daihen-usa.com/hubfs/Logos/daihen-logo-hs-white.png "OTC DAIHEN Logo")](https://www.daihen-usa.com/) - [ROBOTIC WELDING](https://www.daihen-usa.com/robotic-welding/) - [Robotic Welding Cells](https://www.daihen-usa.com/robotic-welding-cells/) - [ECO-ARCs](https://www.daihen-usa.com/eco-arc-series/) - [PT ARCs & SERVO ARCs](https://www.daihen-usa.com/pt-servo-arc/) - [DT-ARCs](https://www.daihen-usa.com/dt-arc-series/) - [ROTA-ARCs](https://www.daihen-usa.com/rota-arc-series/) - [TRI-ARCs](https://www.daihen-usa.com/tri-arc/) - [ED-ARCs](https://www.daihen-usa.com/ed-arc-series/) - [Ready-To-Ship Systems](https://www.daihen-usa.com/pre-engineered-robotic-welding-cells/) - [Arc Welding Robots](https://www.daihen-usa.com/arc-welding-robots/) - [6-Axis Robots](https://www.daihen-usa.com/6-axis-robots/) - [7-Axis Robots](https://www.daihen-usa.com/7-axis-robots/) - [Robot Accessories](https://www.daihen-usa.com/robot-accessories/) - [Robot Controllers](https://www.daihen-usa.com/robot-controllers/) - [Robot Positioner](https://www.daihen-usa.com/robot-positioner/) - [Robotic Sensors](https://www.daihen-usa.com/robotic-sensors/) - [Welding Cobots](https://www.daihen-usa.com/integration/welding-cobots/) - [WELDING POWER SOURCES](https://www.daihen-usa.com/welding-power-sources/) - [Welbee Power Sources](https://www.daihen-usa.com/welbee-power-sources/) - [Welding Torches & Wire Feeders](https://www.daihen-usa.com/welding-torches-and-wire-feeders/) - WELDING TECHNOLOGY - [Synchro Feed Evolution](https://www.daihen-usa.com/low-spatter-synchro-feed-evolution/) - [Plasma Jet TIG Welder](https://www.daihen-usa.com/plasma-jet-tig-welder/) - MORE THAN WELDING - [Material Handling Robots](https://www.daihen-usa.com/material-handling/) - [Plasma Cutting](https://www.daihen-usa.com/plasma-cutting/) - [Finishing Solutions](https://www.daihen-usa.com/finishing-solutions/) - [Assembly](https://www.daihen-usa.com/assembly/) - [RESOURCES](https://www.daihen-usa.com/resources/) - [Blog](https://blog.daihen-usa.com) - [ROI Calculator](https://www.daihen-usa.com/roi-calculator/) - [Subscribe to eNewsletter](https://info.daihen-usa.com/welding-automation-newsletter) - [Product Manuals](https://www.daihen-usa.com/product-manuals-otc-daihen/) - [Reference Charts](https://www.daihen-usa.com/reference-charts/) - [Warranty Info](https://www.daihen-usa.com/resources/warranty-info/) - [Welding Spatter 101](https://www.daihen-usa.com/weld-spatter/) - [Weld Sample Request](https://share.hsforms.com/1988748/29c25b01-8865-4d13-bee7-8571813f5ca5?__hstc=22325028.9076249f07035e1b31fa84fd446fe84d.1709088700121.1709585640965.1709640284848.14&__hssc=22325028.10.1709640284848&__hsfp=2434429739) - [CONTACT US](https://www.daihen-usa.com/contact/) - [Contact Your Rep](https://www.daihen-usa.com/meet-the-team/) - [Ask the Automation Expert](https://info.daihen-usa.com/welding-automation-e-hotline) # Comparing Aluminum Welding With Push-Pull Gun and a Push Gun Posted by [OTC DAIHEN](https://blog.daihen-usa.com/author/otc-daihen) on June 6, 2016 - [Tweet](https://twitter.com/share) ![OTC_blog_790x350_Pushpull.png](https://blog.daihen-usa.com/hubfs/All_Blog_Content/OTC_blog_790x350_Pushpull.png) When your operation is dealing with aluminum welding, it can seem as though there's a whole new world of issues to troubleshoot. Porosity, oxidation, weld cracking, wire burn-backs and many more issues tend to plague production lines around the world. One common concern is whether a push-pull gun or a push gun works best when welding aluminum. In this piece, we'll take a solid look at what the advantages and disadvantages are of each type of gun and how to best incorporate them into your production line. Push-Pull Guns For many in the aluminum welding industry, the push-pull gun has become an excellent tool for extended reach needs. Utilizing a wire feeder near the wire source and a small feed motor in the gun allows extended reach welding up to 50 feet. This allows great maneuverability in and around large structures, albeit with a bit heavier gun. When welding in close proximity to the wire source the longer gun cables could cause a tripping hazard, or become tangled in the work place if not organized well. It’s worth a little research beforehand to consider these points and others like operator ergonomics, including conventional style handles or pistol grip and the gun weight. Other considerations should be high durability to avoid down time, initial cost and running cost ROI. Push Guns So what is the problem with using a push gun for aluminum? Smaller wire diameters, or wire that is not sufficiently stiff can buckle and cause feed problems. An extreme analogy used in the welding industry is… “Like pushing a wet noodle”. However some equipment manufacturers provide specially designed high quality push style guns dedicated for welding aluminum up to 13 feet from the wire feed source, as well as offering extended reach systems. Several options are available from manufacturers to mobilize or extend the reach of push style guns including wire feeder casters, wire feeder booms, track mounting, all-inclusive carts, and more. In addition, the initial equipment cost and maintenance cost compared to push-pull systems is substantially less. By keeping these differences, advantages and disadvantages in mind when selecting a gun for your industrial aluminum welding operation you can ensure that you'll get great results and a more efficient operation. If you still have questions or need help selecting the right gun for your welding machines, [please feel free to contact](https://www.daihen-usa.com/contact/) our technical experts. At OTC Daihen, we've spent nearly a century committed to providing our clients with exceptional welding technology. Topics: [Manual Welding](https://blog.daihen-usa.com/topic/manual-welding) ### **Subscribe!** Get **Keeping It Clean**, a monthly enewsletter with all the latest in welding and robotic automation. # Comparing Aluminum Welding With Push-Pull Gun and a Push Gun Posted by [OTC DAIHEN](https://blog.daihen-usa.com/author/otc-daihen) on June 6, 2016 - [Tweet](https://twitter.com/share) ![OTC_blog_790x350_Pushpull.png](https://blog.daihen-usa.com/hubfs/All_Blog_Content/OTC_blog_790x350_Pushpull.png) When your operation is dealing with aluminum welding, it can seem as though there's a whole new world of issues to troubleshoot. Porosity, oxidation, weld cracking, wire burn-backs and many more issues tend to plague production lines around the world. One common concern is whether a push-pull gun or a push gun works best when welding aluminum. In this piece, we'll take a solid look at what the advantages and disadvantages are of each type of gun and how to best incorporate them into your production line. Push-Pull Guns For many in the aluminum welding industry, the push-pull gun has become an excellent tool for extended reach needs. Utilizing a wire feeder near the wire source and a small feed motor in the gun allows extended reach welding up to 50 feet. This allows great maneuverability in and around large structures, albeit with a bit heavier gun. When welding in close proximity to the wire source the longer gun cables could cause a tripping hazard, or become tangled in the work place if not organized well. It’s worth a little research beforehand to consider these points and others like operator ergonomics, including conventional style handles or pistol grip and the gun weight. Other considerations should be high durability to avoid down time, initial cost and running cost ROI. Push Guns So what is the problem with using a push gun for aluminum? Smaller wire diameters, or wire that is not sufficiently stiff can buckle and cause feed problems. An extreme analogy used in the welding industry is… “Like pushing a wet noodle”. However some equipment manufacturers provide specially designed high quality push style guns dedicated for welding aluminum up to 13 feet from the wire feed source, as well as offering extended reach systems. Several options are available from manufacturers to mobilize or extend the reach of push style guns including wire feeder casters, wire feeder booms, track mounting, all-inclusive carts, and more. In addition, the initial equipment cost and maintenance cost compared to push-pull systems is substantially less. By keeping these differences, advantages and disadvantages in mind when selecting a gun for your industrial aluminum welding operation you can ensure that you'll get great results and a more efficient operation. If you still have questions or need help selecting the right gun for your welding machines, [please feel free to contact](https://www.daihen-usa.com/contact/) our technical experts. At OTC Daihen, we've spent nearly a century committed to providing our clients with exceptional welding technology. Topics: [Manual Welding](https://blog.daihen-usa.com/topic/manual-welding) ### Browse by Categories - [Buyers Guides (5)](https://blog.daihen-usa.com/topic/buyers-guides) - [Customer Success (12)](https://blog.daihen-usa.com/topic/customer-success) - [Manual Welding (44)](https://blog.daihen-usa.com/topic/manual-welding) - [Manufacturing Systems (10)](https://blog.daihen-usa.com/topic/manufacturing-systems) - [OTC DAIHEN News (7)](https://blog.daihen-usa.com/topic/otc-daihen-news) --- ## Keeping It Clean Newsletter Join thousands of others who receive this monthly enewsletter with all the latest in welding and robotic automation. [![Get My Free Newsletter](https://no-cache.hubspot.com/cta/default/1988748/fbed1512-d020-443e-a435-c7792b156f66.png)](https://cta-redirect.hubspot.com/cta/redirect/1988748/fbed1512-d020-443e-a435-c7792b156f66) ![](https://blog.daihen-usa.com/hs-fs/hubfs/daihen_footer_logo.png?width=158&height=76&name=daihen_footer_logo.png) 1400 Blauser Dr Tipp City, OH 45371 Phone: [(937) 667-0800](tel:9376670800) Fax: (937) 667-0885 [Robotic Welding Cells](https://www.daihen-usa.com/robotic-welding-cells/) [ECO-ARCs](https://www.daihen-usa.com/eco-arc-series/) [PT-ARCs & SERVO-ARCs](https://www.daihen-usa.com/pt-servo-arc/) [DT-ARCs](https://www.daihen-usa.com/dt-arc-series/) [ROTA-ARCs](https://www.daihen-usa.com/rota-arc-series/) [TRI-ARCs](https://www.daihen-usa.com/tri-arc/) [ED-ARCs](https://www.daihen-usa.com/ed-arc-series/) [Arc Welding Robots](https://www.daihen-usa.com/arc-welding-robots/) [6-Axis Robots](https://www.daihen-usa.com/6-axis-robots/) [7-Axis Robots](https://www.daihen-usa.com/7-axis-robots/) [Robot Controllers](https://www.daihen-usa.com/robot-controllers/) [Robot Positioners](https://www.daihen-usa.com/robot-positioner/) [Robot Sensors](https://www.daihen-usa.com/robotic-sensors/) [Welding Power Sources](https://www.daihen-usa.com/welding-power-sources/) [Welbee Power Sources](https://www.daihen-usa.com/welbee-power-sources/) [Welding Torches & Wire Feeders](https://www.daihen-usa.com/welding-torches-and-wire-feeders/) [Frequently Asked Questions](https://www.daihen-usa.com/faqs/) [Support](https://www.daihen-usa.com/support/) [Training](https://www.daihen-usa.com/training/) [Resource Center](https://www.daihen-usa.com/resources/) [About OTC DAIHEN](https://www.daihen-usa.com/about-otc-daihen/) [Contact Us](https://www.daihen-usa.com/contact/) [Careers](https://www.daihen-usa.com/careers/) [Become a Distributor](https://www.daihen-usa.com/become-a-distributor/) Copyright © 2024 OTC DAIHEN. | [Privacy Policy](https://www.daihen-usa.com/privacy-policy/) | Web Design by [Marketing Essentials](https://mktgessentials.com/) ```json { "@context" : "http://schema.org", "@type" : "Organization", "logo" : "https://www.daihen-usa.com/wp-content/uploads/2022/05/logo.png", "name" : "OTC DAIHEN", "url" : "https://www.daihen-usa.com" } ``` ```json { "@context" : "https://schema.org", "@type" : "BlogPosting", "author" : { "@type" : "Person", "name" : "OTC DAIHEN", "url" : "https://blog.daihen-usa.com/author/otc-daihen" }, "dateModified" : "2022-09-02T18:09:32.329Z", "datePublished" : "2016-06-06T15:00:00.000Z", "headline" : "Comparing Aluminum Welding With Push-Pull Gun and a Push Gun", "image" : [ "https://blog.daihen-usa.com/hubfs/All_Blog_Content/OTC_blog_790x350_Pushpull.png" ], "mainEntityOfPage" : { "@id" : "https://blog.daihen-usa.com/comparing-aluminum-welding-with-push-pull-gun-and-a-push-gun", "@type" : "WebPage" }, "publisher" : { "@type" : "Organization", "logo" : { "@type" : "ImageObject", "url" : "https://blog.daihen-usa.com/hubfs/daihen-logo-hs-01.png" }, "name" : "OTC DAIHEN Inc." } } ```